Costumes, props and art
For as long as i can remember i have loved costumes, props and modelbuilding and painting.
So here i have gathered photos of some photos of some of the work i’ve done, both professionally and privately.
3D Printed Stormtrooper helmet (Mix of filament and resin printing) With a heavy weathered/muddy paintjob
Kylo Ren helmet from Star Wars (Filament 3D printed)
Han Solo blaster replica (Resin 3D Printed, with metal greebling and screws)
Filament 3D Printed Darth Revan mask from Star Wars
Kylo Ren helmet from Star Wars (Filament 3D printed)
Kylo Ren helmet from Star Wars (Filament 3D printed)
Handmade clay sculptute, Cthulhu Idol. Made for the production of Whitehaven (2024)
Latex creature mask sculpture for Whitehaven (2024)
Latex creature chest prosthetic sculpture for Whitehaven (2024)
3D Printed Glock pistol Replica printed for a classmates short film production.
A lamp i constructed out of an old mannequin, made as a centre piece for an eccentric character in a short film a friend was working on (ended up unproduced)
The noose we used for a hanging sequence in the horror short Candletree (2023)
Beginning stage for the altarpiece for the short film Candletree (2023)
The altar setup on set for the horror short Candletree (2023) Made using twigs, rope, flowers and chicken bones.
The pattern for the Count Orlok signet ring for my costume cut using my lasercutter.
Count Orlok's signet ring for my Nosferatu (2024) costume. (lasercut inlay)
Handsculpted & painted Eileen The Crow Mask - Foamclay w handsewn hood and hat
Michael Myers Mask (Trick or Treat Studios.) Latex mask Repaint & hair restyling by me.
Resin printed replica of Han Solo's DL44 blaster pistol from Star Wars (raw print, pre-painting)
3D Printed Darth Vader helmet (work in progress) (Mix of filament and resin printing)
Finished 3D Printed Darth Vader helmet (Mix of filament and resin printing)
Finished 3D Printed Darth Vader helmet (Mix of filament and resin Printing) Finely polished using car polish and wax
Morgul Dagger from The Lord of The Rings Resin printed
Count Orlok Cosplay from Nosferatu (2024) (pictured mask not made by me)
Count Orlok Cosplay from Nosferatu (2024). Featuring latex makeup, Handsewing, Heavy weathering/distressing, full faux-fur lining and gold floral pattern stamping done by me.
Aizen Sousuke from Bleach (2001) Handsewn Japanese Kimono, Hakama and Wig Styling by me
Starscourge Radahn from Elden Ring (2022) Crafted and painted by me out of EVA-Foam mats and Foamclay.
Count Orlok Cosplay from Nosferatu (2024). Everything pictured was handmade by me.
Count Orlok Cosplay from Nosferatu (2024) Everything pictured was handmade by me.
Count Orlok Cosplay from Nosferatu (2024). (my makeup pictured)
Slave Knight Gael from Dark Souls III (2016) Crafted and painted by me out of EVA-Foam mats. The almost two meter long sword was also made from Foam
Eileen the Crow from Bloodborne (2015) Sewn by hand, featuring lasercut swords designed by me, and a mask handsculpted from FoamClay.
Eileen the Crow from Bloodborne (2015) My first time working with Leather for the pouches and bootcovers.
Aizen Sousuke from Bleach (2001) Handsewn Japanese Kimono & Wig Styling by me
Aizen Sousuke from Bleach (2001) Handsewn Japanese Kimono & Wig Styling by me
Eileen the Crow from Bloodborne (2015) Everything pictured was handmade by me.
Starscourge Radahn from Elden Ring (2022) Crafted and painted by me out of EVA-Foam mats and Foamclay (Pictured here, before and after paint work)
Starscourge Radahn from Elden Ring (2022) Crafted and painted by me out of EVA-Foam mats and Foamclay, with faux-fur lining in the gauntlets and greaves.
Plague Doctor Costume, featured a mask made from Papier-mache, and handsewn fabric pieces.
Michael Myers from Halloween (1978) Store bought Latex mask, stripped of original paint and refinished by me. (Latex paint) The blue coveralls were also heavily weathered, distressed and resewn by me.
Kylo Ren from Star Wars The Force Awakens (2015) Handmade by me. Featuring a 3D printed helmet made and painted by me, and A pleated tunic sewn by me with over 40 horizontal pleats across the whole tunic (sleeves included).
Eileen the Crow from Bloodborne (2015) The cape was made from a mix of fabric and bird feathers.
Fallout Protectron 1/6th scale figure (Resin Print) (Painted)
Statue of Ludwig the Accursed from the game Bloodborne (2015) Resin 3D Printed, prepped and painted by me.
Ludwig the Accursed 3D Printed statue fully finished.
50cm tall Filament 3D Printed model of Godzilla from the film Shin Godzilla (2016) Seen here fully prepped, textured and painted by me.
Filament 3D Printed model of Godzilla from the film Shin Godzilla (2016) Seen here fully finished by me.
3D Printed model of Godzilla from the film Shin Godzilla (2016) (head seen here before any prep, texturing or painting) fresh off the printer.
1/35 scale WW1 Diorama, Scratchbuilt and painted by me.
1/35 scale WW1 Diorama, Scratchbuilt and painted by me.
1/35 scale Diorama of an abandoned Soviet MI-24 Helicopter made and painted by me.
Warhammer 40K Miniature artillery cannon by me
Warhammer 40K Miniature artillery cannon by me
Warhammer 40k miniature assembled and painted by me
Warhammer 40k miniature assembled and painted by me
Warhammer 40k miniature assembled and painted by me
3D Printed Miniature Pre-Dreadnought Diorama
3D Printed Miniature Pre-Dreadnought Diorama
Warhammer 40k miniature assembled and painted by me
Warhammer 40k miniature assembled and painted by me
Warhammer 40k miniature assembled and painted by me
1/350 Scale SMS Emden Diorama
1/350 scale SMS Emden Diorama
1/35 Tiger tank model, built and painted by me.
3D Printed Replacement helmet for a 1/10th scale Darth Vader statue Finished product
3D Printed Replacement helmet for a 1/10th scale Darth Vader statue (raw resin print)
3D Printed Replacement helmet for a 1/10th scale Darth Vader statue, Original helmet VS my 3D Printed Finished product
1/6th scale figure of R2D2 from Star Wars, Printed, assembled and painted by me. (here raw off the resin printer)
1/6th scale R2D2 after finishing and painting by me.
Fallout Protectron 1/6th scale figure (Resin Print) (RAW)